LR Proteus Base Coating Done!

My Proteus is finally base coated. The next step is to adde the transfers, perform the paint chipping,  and then add the dust up the lower half of the tank so it matches my other Ultramarines vehicles. I am going to attach the tracks last, so I can dust the tank, and then weather the tracks using weathering powders. This is a great kit, though it is very fragile.

Inexplicably I used the new GW paints to finish off the tank, and I think parts painted with them look worse than with the parts I painted with the original paint set. I'm not going to let that detract from my enjoyment of the kit though. I think it will all tie together with the weathering. I have been waiting months to get to the fun final steps, so maybe I'll save them for tomorrow. Why rush at this point right?

Land Raider Proteus Update

I decided to give the new GW necron silver dry paint(don't remember its real name) a try on my Land Raider Proteus's tracks. Normally I would airbrush the tracks, but since they were available, primed black already, and sitting near one of the new paints I thought I should give it a go. I am not sold on the dry compounds, but I think the tracks look ok. The tracks will receive a layer of dust, and then weathering powders so  the tank matches the rest of my Ultramarine units.

I really love this model, so I just wanted to share it. Maybe I'll even finish it one day. Of course if I do that then I won't have it hanging around my painting desk keeping me company.

Vostroyan Painted With New GW Paints

I know I said my next paint experiment using the new paints was going to be an OOP rhino, but I decided last minute to paint something that would be easier for me to strip. A few minutes later I had Vostroyan trooper in hand. It makes sense after all, aren't regular army types the traditional guinea pigs for experimentation?  This miniature was painted using the following rules:

1. Only use new gw paints
2. paint directly out of the pot (I did thin the verdigris---I did this out of habit and stopped when I remembered the rules)
3. follow base + wash + base + layer model

I'd tell you which paints I used, but the names are ...well you know.

When I showed the mini to my wife and asked her what she thought, she paused for a long time. "The paint is think" was her primary remark. If you've been following my work for any amount of time, it should be apparent that I like as little paint on a model as possible. It is why I use airbrushes for my base coats, and why I thin my paints as much as possible. I don't like the look of heavily painted models. On the other hand, I don't think this guy is as bad as my first test mini with the new paints.

Lessons learned so far:

1. The washes do not set in the recesses when used out of the pot.
2. Mephiston red really is a beautiful color
3. The metals need a lot of shaking, and brass/gold may be usable for copper.
4. The silver metals are just as terrible as mentioned before. They clog details.
5. The GW method makes it faster to paint because there is no mixing, and no thinning.

Basing With New GW Paints

I've been trying to stay positive about the new GW paints, but at this point I am not a fan of the change. Generally speaking (and that is the only way to speak given how impossible it is to remember the paint names) the new paints have worse coverage and larger pigment sizes.  On the plus side these paints are pre-thinned, which will really help new painters who painted directly from the pot before. This makes the new range more accessible to the newbie, and I think many more higher quality miniatures will show up on gaming tables because of these changes.

After buying ~500 dollars worth of paints(yes I bought all of them) I rushed online to Amazon and bought as much of the old line as possible. That was merely a delaying tactic. Eventually I will have to use the new paints.

So you've got my bias now.

What do we do now? Well, if you are like me and have a large sum invested in new paint  you've got to experiment with it. Let's see where we stand:

• Metallics: Fail (They should not even be sold)
• Base In General: Fail (Exception for the blood red replacement)
• Layers: Pass (The concept of layer paints that are pre-thinned is ok)

What I tried in the image above, is use the weird sand/paint stuff to texture the dirt areas in-between the bricks. I also used the new dev mud replacement. At the very end I used one of the weirder dry paints to dry brush the top. I don't hate how the base came out, but the odd plastic-like texture on the sides is a bit off putting. The base color does not seem to self-level well, and dries with streaks. The dry brushed area looks ok. I think that model fits in line with how GW intends the paints to be used.

Now it may be that these paints behave better in an airbrush. I am going to find that out tonight. I intend to paint up another original rhino to see if it can end up looking like one of these:

Given that GW's color matching does not make sense, I am going to match the paints by hand. Hopefully I will be able to show results equal to or better than my existing work. Anything less and I will be....well sad really.... It will be as if GW stole my hobby from me. (ok that is a bit dramatic. I love GW after all!)

Test Mini With New Paints

After rushing out to GW Springfield to buy a load of new paints, I had to rush home and try them out on a test mini. Now I normally use an airbrush for most of my painting these days, so given that I would be only using a brush, and not really caring about the finished product, I decided  to paint a Black Templar. Oddly enough, I am not entirely sure what the Black Templar color scheme really is outside of the white shoulder pads and black PA. In any case, the Templar-ish scheme allowed me to experiment with the base and layer whites, as well as the grayish-white dry paint. Additionally I used the red glaze on the shoulder pads.  I went a little wild with edge highlights in order to learn how the paint would flow.

Some quick observations.

• White still does not paint that well, even though these whites are clear improvements. It is lumpy and chalky, but better than before. Space wolves grey is still my favorite white replacement.
• The layers stay wet longer and flow really well. this really helps blending and edge highlighting.
• I miss the old paints. I am a little lost with all these colors. 

I'll experiment more with these tomorrow, or maybe I'll just paint with my old paints, who knows.

*EDIT

So I played around with the Space Wolf base color as well as the tutorial on painting them from the latest GW. The metallics cover well, but that is because they are really heavy. There are pluses and minuses to this. The older silver colored metallics work better for me. The colors are more consistent, and they clog much less detail. The new golds will have their uses, but they do not produce the kind of brilliant gold that  previously was a stable for painting icons.  I do like the darker space wolf color, but I will have to see how it goes through an airbrush before I can commit to using it.

FW Armored Proteus

I am not sure what the deal is with FW parts these days, but I have had quite a few misses recently. The FW Proteus has a weird mashed area above the door, as well as chapter doors that do not fit right. On the other hand....FW resin=crack. I just can't buy enough of the stuff. Even in non perfect form I love FW. The Proteus finally has painted doors now, which will get paint chipping and dust weathering along with the rest of the tank once transfers have been added. I hope to finish this guy sometime this weekend, and may even take the opportunity to finish some of my BA models.

ok...got to shake off those new paint jitters and get to work!

New Paint Fears

I write this from Colorado, where I have been skiing in the continental divide. While traversing double blacks and bowls, I find myself worried about paint. I should be worried about cliff or rocks or other things suggested by the extreme terrain markers, but instead I am worried that all the effort I have put into learning the specific properties of gw paints is for nought. Despite this, I embrace the change. The whole new paint line seems designed to make beautiful results achievable by anyone. This is a good thing. I believe the new recipe book and paints are going to improve the quality of the models we see, which is great for the hobby. Several of the blogs I read have already tentatively endorsed the change made by gw. I think if we were to take off our jaded glasses and approach painting with new eyes, we'd probably be really excited. I think the loss of hard won paint knowledge is just a fear we will all have to get over. I for one, am really excited about the dry brush paint. Fear is the mind killer.

Scratch Building A Ragnarok Part 2

So after hours and hours of sanding, waiting for liquid green stuff to dry, and then more sanding, I just decided to prime the model to see how it would look. As this is just a proof of concept, I am ok with the irregular construction. I hadn't planned this to be a practice run, but hey, that's how things work out sometimes. I've learned quite a bit during the construction.

1. I need to find a better way to cut out patterns. It was incredibly difficult to get anything to come out properly. I am quite pleased that the tank fit together at all.
2. Don't use sanding to get parts to fit. If cut properly they should fit the first time.
3. Don't rush ahead and put on rivets before all the sanding is done.
4. Use as little glue on rivets as possible. Any pooling at all will mess up the integrity of the design.
5. Measure rivet locations just as precisely as cutting the plastic.
6. Casting links is incredibly boring, and despite being able to pressure case, I find myself just letting bad casts through. I think on this model it will look ok since I can just mud up the tracks.
7. Pressure cast. My pressure casts are near perfect now. It just takes longer. 
8. Add more plates to the body overall, and use something as a spacer. 
9. Make just a turret next time.
10. There are always 10 bullets. 

I wish I had made more progress, since this tank is meant to serve as the base for a test paint job, but a friends 30th birthday got in the way, along with the resulting two day hangover!